Bedroom Lighting Direct From Factory
Factory-direct bedroom lighting — pendants, ceiling fixtures, sconces, and master bedroom chandeliers built for wholesale and project supply.
18 years manufacturing decorative luminaires for distributors and contractors across North America, Europe, the Middle East, and Australia. CE, UL, and SAA certified. OEM/ODM supported.
What Bedroom Lighting Covers — and Why the Segment Rewards Specialization
Bedroom lighting is one of the broadest application segments in residential decorative lighting, and that breadth is exactly what makes it commercially interesting. A single bedroom project spec can call for a statement ceiling fixture over the bed, wall sconces flanking a headboard, a pendant or two in a walk-in wardrobe, and recessed downlights for general fill — four fixture categories, one room, one order. For distributors building a residential line, that cross-category pull means higher average order values and stronger account stickiness than single-category sourcing.
We manufacture across all of those fixture types. Our bedroom lighting range draws from our pendant, chandelier, ceiling, wall sconce, and spotlight lines — the same production infrastructure, the same QC process, the same certification portfolio. If you're building a bedroom lighting collection for a retail catalog or specifying fixtures for a residential development, you're sourcing from one factory rather than coordinating across three or four.
Cross-Category Pull Per Room
One bedroom spec can span ceiling fixtures, pendants, wall sconces, and spotlights — four fixture categories from a single factory, one order, one QC standard.
Pendants
Chandeliers
Ceiling Fixtures
Wall Sconces
Two Commercial Tiers, Two Sourcing Strategies
The segment splits cleanly into two commercial tiers that require different sourcing strategies. We run both — and most of our North American and European buyers source from both tiers simultaneously.
Standard Bedroom Lighting
Flush mounts, simple pendants, basic sconces — moves on volume and price efficiency. These SKUs carry the margin baseline for distributors building residential catalog depth.
Master Bedroom & Luxury Residential
Moves on design differentiation and finish quality. The premium pieces justify catalog positioning and attract higher-value project accounts.
Most of our North American and European buyers source from both tiers simultaneously — the volume SKUs carry the margin baseline, and the premium pieces justify the catalog positioning.
Fixture Types We Manufacture for Bedroom Applications
Bedroom lighting programs typically require a coordinated mix of fixture types. Here's how our production covers each category.
Ceiling Fixtures — Flush Mounts and Semi-Flush for Standard Bedrooms
Flush mount and semi-flush ceiling fixtures are the volume backbone of any bedroom lighting line. They move in high quantities across mid-market residential, hospitality, and multi-unit residential projects.
Our ceiling fixture line covers aluminum and zinc alloy housings, glass and acrylic diffusers, and a range of finishes from matte white and brushed nickel to brushed gold and matte black. Standard ceiling bedroom lighting ships with integrated LED drivers matched to destination market voltage — 120V for North America, 220–240V for Europe and Australia, with dimming compatibility available across most SKUs.
Volume & Consistency
For buyers supplying multi-unit residential developers or hospitality groups, flush mounts are typically the highest-volume SKU in a bedroom lighting program. We can run batches of 500–2,000 units per SKU with consistent finish quality across the batch — the automated powder line holds 60–80μm thickness, so unit 1,800 looks the same as unit 1.
Pendant Lighting — Bedside and Feature Pendants
Bedside pendants have become a standard specification in mid-to-high-end residential and boutique hotel bedrooms, replacing traditional table lamps in a growing share of projects. The commercial logic for distributors is straightforward: pendant pairs sell at higher ASPs than table lamps, require professional installation (contractor relationship), and are harder for end customers to swap out — lower churn, higher margin.
Our pendant range for bedroom applications covers single-drop cylinder pendants, fabric-shade pendants, glass globe pendants, and cluster configurations for feature positions.
Factory-Set Cord Length
Cord length is adjustable at the factory level — we set the drop to your spec rather than shipping a standard length that your customers have to cut and re-terminate on-site. We've had buyers come to us after their previous supplier shipped fixed-length cords that were 200mm too short for the ceiling heights in their hotel project. That's an avoidable problem.
Margin Opportunity
For modern bedroom lighting programs targeting the mid-to-premium residential segment, pendant pairs are one of the highest-margin SKUs in the category. We can configure matching pairs with synchronized cord lengths and matched finish batches — important when the fixtures are installed side-by-side and any color variation is immediately visible.
Wall Sconces — Bedside and Accent
Wall sconces for bedroom applications split into two functions: bedside reading sconces (directional, adjustable arm or fixed) and decorative accent sconces for ambient layering. Both are strong performers in the hospitality segment — boutique hotels and serviced apartments specify sconces in every room, and the reorder pattern is predictable once you're on the approved vendor list.
Our wall sconce line covers die-cast aluminum and zinc alloy bodies, with arm configurations from fixed to articulating. Backplate dimensions are standardized to common electrical box sizes for North American and European markets, so your installation teams aren't dealing with fit issues on-site.
For buyers supplying the hospitality segment, we can configure sconces with hardwire termination rather than plug-in — the standard requirement for hotel room installations.
Construction & Compatibility
- Die-cast aluminum and zinc alloy bodies
- Fixed to articulating arm configurations
- Backplates standardized to North American and European electrical box sizes
- Hardwire termination available for hospitality specifications
Master Bedroom Chandeliers and Statement Ceiling Fixtures
Master bedroom lighting is where design differentiation drives margin. A well-specified chandelier or statement ceiling fixture in a master bedroom commands a price premium that flush mounts can't — and for distributors supplying interior designers, architects, or luxury residential developers, this is the category where your catalog positioning matters most.
Our chandelier and decorative ceiling fixture range for master bedroom applications covers linear chandeliers, multi-arm branch chandeliers, drum pendants with fabric or glass shades, and sculptural ceiling fixtures in metal and mixed materials. These are the SKUs where our in-house die-casting and CNC machining capability makes a visible difference.
The casting geometry on a multi-arm chandelier involves complex branching structures with tight dimensional tolerances — if the arm lengths aren't consistent to within ±1mm, the fixture hangs asymmetrically and the defect is immediately visible. We hold ±0.1mm on critical mounting dimensions across the production run, not just on the sample.
Linear Chandeliers
Multi-Arm Branch Chandeliers
Drum Pendants
Fabric or glass shades
Sculptural Ceiling Fixtures
Metal and mixed materials
Finish Options for Master Bedroom Lighting
Finish consistency across a multi-SKU order matters: if your catalog shows a coordinated bedroom collection in brushed gold, every piece needs to match. We batch finish runs by color to ensure that consistency.
All five finishes run in-house on PVD and electroplating lines.
Technical Specifications — Bedroom Lighting Range
Specifications below represent industry-standard values for our bedroom lighting product range. Actual specifications vary by SKU and configuration — contact us for detailed product data sheets on specific models.
| Parameter | Ceiling Fixtures | Pendant Lighting | Wall Sconces | Chandeliers |
|---|---|---|---|---|
| Housing material | Aluminum alloy / zinc alloy | Aluminum alloy / steel / glass | Die-cast aluminum / zinc alloy | Aluminum alloy / steel |
| Typical diameter / span | 300–600mm | 100–350mm shade | 150–300mm backplate | 400–1200mm |
| Light source | Integrated LED / E26/E27 | E26/E27 / integrated LED | E26/E27 / G9 / integrated LED | E12/E14/E26/E27 |
| Wattage range | 12–48W (integrated) | 6–18W per head | 5–15W | 3–8W per arm |
| Voltage | 110–120V / 220–240V | 110–120V / 220–240V | 110–120V / 220–240V | 110–120V / 220–240V |
| Color temperature | 2700K / 3000K / 4000K | 2700K / 3000K | 2700K / 3000K | 2700K / 3000K |
| CRI | ≥80 (standard) / ≥90 (premium) | ≥80 / ≥90 | ≥80 / ≥90 | ≥80 / ≥90 |
| Dimming | TRIAC / 0-10V (market-dependent) | TRIAC / 0-10V | TRIAC / 0-10V | TRIAC / 0-10V |
| IP rating | IP20 (standard indoor) | IP20 | IP20 / IP44 (bathroom-adjacent) | IP20 |
| Finish options | Matte white, brushed nickel, brushed gold, matte black, chrome | Brushed gold, matte black, brushed nickel, antique brass | Brushed gold, matte black, brushed nickel, chrome | Brushed gold, antique brass, matte black, chrome, brushed nickel |
| Certifications | CE, UL, SAA | CE, UL, SAA | CE, UL, SAA | CE, UL |
Ceiling Fixtures
Pendant Lighting
Wall Sconces
Chandeliers
Specifications are industry-standard values for this product range. Actual specifications vary by model and configuration. Contact us for detailed data sheets, IES files, and test reports on specific SKUs.
Market Segments Where Bedroom Lighting Generates Repeatable Volume
Mid-to-High-End Residential Development
Residential developers building mid-to-high-end apartment or condominium projects specify bedroom lighting across every unit — typically 1–3 fixtures per bedroom, 2–4 bedrooms per unit. A 200-unit development can represent 800–2,400 bedroom fixtures in a single project order. Developers in this segment prioritize consistent finish quality across the entire project (all units need to match), reliable delivery against construction schedules, and documentation for building compliance.
For distributors supplying this segment, the project cycle is predictable: specification happens 6–12 months before delivery, orders are large and concentrated, and a successful project creates a reference that opens the next one. The fixture types that move in this segment are mid-spec ceiling fixtures, bedside pendant pairs, and wall sconces — not the highest-margin SKUs individually, but high-volume and repeatable.
Boutique Hotels and Serviced Apartments
Hospitality bedroom lighting is one of the most commercially reliable segments in the category. Hotels renovate on 5–7 year cycles, and a property with 80–200 rooms represents a concentrated order across a narrow SKU set — the same fixture specified for every room. Boutique hotels and design-led serviced apartments in this segment prioritize design differentiation (the fixture is part of the brand identity) and installation reliability (a defective fixture in a guest room is an immediate operational problem).
The fixture mix for hospitality bedrooms typically includes a ceiling fixture or pendant for the main position, bedside sconces or pendants, and occasionally a statement piece in suites. Hardwire termination is standard. We configure fixtures to hospitality spec — hardwire, appropriate cord management, and finish durability rated for the cleaning protocols used in hotel environments.
Matte black finishes in hospitality need to hold up to regular wiping with cleaning agents — we run adhesion tests on finish samples before committing hospitality orders to production.
Furniture Retailers and E-Commerce Distributors
Bedroom lighting is a natural adjacency for furniture retailers — customers buying a bed frame or bedroom set are already in the purchase mindset for bedroom fixtures. Retailers in this channel need fixtures that photograph well, ship without damage in individual cartons, and carry low return rates.
The operational requirements for this channel differ from project-based segments. Retailers need consistent stock availability, individual packaging with retail-ready presentation, and fixtures that end consumers can install without professional help. Plug-in options and simple canopy mounts reduce installation friction and lower return rates. Clear, multilingual installation instructions and QR-linked video guides are standard inclusions for retail-channel SKUs.
For e-commerce distributors specifically, product photography assets, lifestyle imagery, and detailed specification copy become part of the supply requirement — not an afterthought. We provide high-resolution product imagery, dimension diagrams, and installation videos as part of the onboarding package for retail and e-commerce partners.
Interior Design and Specification Firms
Interior designers specify bedroom lighting for individual residential clients and multi-unit projects. Their requirements center on design range (they need options that match diverse aesthetic briefs), finish accuracy (the fixture needs to match the finish palette they've specified for the room), and reliable lead times (their project timelines depend on fixture delivery).
Designers typically work across multiple projects simultaneously, and a designer who trusts a supplier's range and reliability becomes a recurring source of orders — not large individual orders, but steady volume across 10–30 projects per year. The fixture types specified by designers tend toward higher-margin SKUs: statement pendants, custom-finish sconces, and coordinated multi-fixture schemes.
Supporting this channel requires finish samples, CAD files or 3D models for visualization, and responsive communication on lead times and custom options. We maintain a sample program for active design partners and provide specification sheets formatted for inclusion in design presentations.
Customization Capabilities for Bedroom Lighting
Every channel has specific requirements that standard catalog products don't fully address. Our customization program bridges the gap between catalog range and project-specific needs.
Custom Finish Matching
Match fixtures to specific RAL, Pantone, or proprietary finish references. We produce finish samples for approval before committing to production. MOQ applies per custom finish — typically 50 units for electroplated finishes, 30 units for powder coat.
Dimension Modification
Adjust fixture dimensions to suit specific ceiling heights, room proportions, or installation constraints. Pendant drop lengths, sconce projection depths, and chandelier spans can be modified within structural limits. Engineering review included for structural modifications.
Shade & Diffuser Options
Swap glass types (clear, frosted, ribbed, smoked), fabric shade materials, or diffuser opacity to adjust light output character. Opal glass for soft ambient wash, clear glass for sparkle and shadow play, fabric for warm residential warmth.
Electrical Configuration
Configure voltage, socket type, dimming protocol, and termination method for your market. Hardwire for hospitality and project, plug-in for retail. Driver selection matched to the dimming infrastructure specified for the project.
Packaging & Labeling
White-label packaging with your brand, retail-ready individual cartons, or bulk project packaging — configured to your channel requirements. Barcode, compliance marks, and multilingual instructions included per market specification.
OEM/ODM Development
Develop exclusive designs from concept through production. Our engineering team works from your design brief or reference imagery to produce tooling-ready drawings, prototype samples, and production-validated fixtures. Typical development cycle: 4–8 weeks to approved sample.
Quality Process for Bedroom Lighting Production
Bedroom fixtures operate in close proximity to people — on nightstands, above beds, within arm's reach. Quality failures in this category create safety liability and brand damage. Our QA process is built around preventing field failures.
Incoming Material Inspection
Raw materials and components inspected against approved specifications before entering production. Finish consistency, glass clarity, electrical component ratings verified at intake. Rejected lots returned before they enter the production line.
In-Process Quality Checks
Critical checkpoints at assembly stages — solder joint inspection, wiring continuity testing, finish adhesion spot checks, and dimensional verification against tolerance specifications. Issues caught here cost a fraction of post-production rework.
Electrical Safety Testing
100% hi-pot (dielectric strength) testing on every fixture. Ground continuity verification. Leakage current measurement. These are not sample-based — every unit is tested before it leaves the line. Test records retained for traceability.
Burn-In and Aging Test
Sample units from each production batch undergo extended burn-in testing — continuous operation at rated voltage to identify early-life failures (infant mortality). LED driver thermal performance monitored during aging to confirm long-term reliability projections.
Final Inspection and Packaging Audit
AQL inspection per ISO 2859-1 at the level agreed with each customer (typically AQL 1.5 for critical defects, AQL 2.5 for major). Packaging drop-test validated to ensure fixtures survive transit. Inspection reports and photos provided with each shipment.
Certifications & Compliance
How to Work With Us on Bedroom Lighting
From initial inquiry to delivered goods, here's how the process works. We've structured it to minimize your time investment while giving you full visibility at each stage.
Inquiry & Requirements
Share your requirements — target market, fixture types, quantities, finish preferences, certification needs, and timeline. We respond within 24 hours with initial feasibility and pricing guidance.
Quotation & Samples
Detailed quotation with unit pricing, tooling costs (if applicable), lead times, and MOQs. Sample production for your evaluation — typically 7–10 days for catalog items, 15–20 days for custom configurations.
Production & QC
Upon sample approval and order confirmation, production begins. You receive progress updates at key milestones. Pre-shipment inspection report with photos provided before goods leave the factory.
Delivery & Support
Shipping arranged to your warehouse or project site. Full documentation package included — test reports, compliance certificates, installation guides. Post-delivery support for any technical questions or warranty matters.
Typical Lead Times
Catalog items: 25–35 days from order confirmation. Custom finish or configuration: 35–45 days. OEM/ODM new development: 45–60 days (including sample approval cycle). Rush production available for time-critical projects — discuss at inquiry stage.
Ready to Source Bedroom Lighting?
Whether you're specifying for a 200-unit development, outfitting a boutique hotel, or building a retail lighting range — start with a conversation. Share your requirements and we'll respond within 24 hours with pricing guidance and sample availability.
Frequently Asked Questions
What is the minimum order quantity for bedroom lighting fixtures?
MOQs vary by product type and customization level. Standard catalog items typically start at 50–100 units per SKU. Custom finish orders start at 30–50 units depending on the finish process (powder coat vs. electroplating). For OEM/ODM development with new tooling, MOQs are discussed during the quotation stage based on tooling investment and unit economics.
Can you match a specific finish reference (RAL, Pantone, or physical sample)?
Yes. We can match RAL codes, Pantone references, or physical samples you provide. The process involves producing a finish sample panel for your approval before production begins. Turnaround for finish samples is typically 5–7 working days. Note that some finishes have inherent variation between batches — we'll advise on achievable tolerance for your specific finish request.
Do you handle certification for my target market?
We hold CE, UL, and SAA certifications across our standard range. For products requiring specific market certifications not already held, we manage the certification process including test sample preparation, lab coordination, and documentation. Certification timelines and costs are included in the project quotation. Common additional certifications we handle include ETL, FCC (for smart fixtures), and various national marks.
What dimming systems are your fixtures compatible with?
Our LED fixtures support TRIAC (leading/trailing edge), 0-10V, and DALI dimming depending on the driver specified. For residential applications, TRIAC compatibility isstandard as it works with most household dimmers. For hospitality and high-end residential projects, we can specify DALI or Casambi-compatible drivers for integration with building management systems. We maintain a tested compatibility list with major dimmer brands and can advise on the best driver-dimmer pairing for your project.
Can I get my own branding and packaging on the products?
Yes. We offer full OEM packaging including custom retail boxes, branded installation guides, your logo on the fixture or label, and barcoding (UPC/EAN). White-label service is available for all catalog items. For custom packaging design, provide your artwork files and we'll produce a packaging proof for approval. Packaging development typically adds 5–7 days to the sample stage.
What warranty do you provide on bedroom lighting fixtures?
Standard warranty is 3 years covering manufacturing defects and LED driver failure under normal use conditions. Extended 5-year warranty is available for project-specific requirements — this is common for hospitality and commercial residential projects. Warranty claims are handled with replacement units shipped from stock. We maintain a defect rate below 0.5% across our bedroom lighting range.
Related Lighting Categories
Explore other indoor lighting categories that complement bedroom installations or serve adjacent project needs.
Living Room Lighting
Statement pendants, recessed downlights, and accent lighting for living spaces. Many fixtures cross over between bedroom and living room applications.
Hotel & Hospitality Lighting
Guest room lighting packages designed for durability and guest comfort. Coordinated bedside, overhead, and bathroom fixture sets for hospitality projects.
Bathroom Lighting
IP-rated vanity lights, mirror lighting, and ceiling fixtures for wet environments. Often specified alongside bedroom lighting for whole-home or hotel projects.
Customization: What We Can Configure and Where the Limits Are
Bedroom lighting customization requests fall into a few predictable categories. Here's what we can do and where the practical limits sit.
Finish Customization
Any RAL color is available on powder-coated finishes for runs of 100 units or more per SKU. PVD and electroplating finishes (brushed gold, chrome, antique brass) are available in our standard palette on any order quantity.
Custom PVD colors require a minimum run of 200 units to justify the process setup.
Below those thresholds, the finish line changeover cost doesn't make sense for either side.
Dimension Customization
Ceiling fixture diameter, pendant drop length, and chandelier arm span can be adjusted within the tooling range of existing molds.
Changes that require new tooling add 15–20 days and a one-time tooling cost — we'll quote this separately and it amortizes quickly on runs over 300 units.
For buyers with specific ceiling height requirements (common in hospitality projects with non-standard floor-to-ceiling heights), we adjust cord and rod lengths at no additional cost on orders over 50 units.
Light Source & Driver Configuration
We configure LED drivers per SKU for destination market voltage and dimming compatibility. If your market requires a specific dimmer protocol (Lutron, Leviton, or a regional standard), tell us at the spec stage — retrofitting driver specs after production is expensive.
Color temperature is selectable at order time across our standard range:
Custom CCT requires a minimum run of 200 units.
OEM / ODM
We support full OEM (your design, our production) and ODM (our design capability applied to your brief).
Prototype turnaround runs 7–10 working days from approved drawings to physical sample.
For ODM projects, our 15-engineer R&D team works from reference images, target dimensions, and cost parameters — we've done enough bedroom lighting development to know where the cost traps are in decorative fixture design and we flag them before tooling is committed.
Labeling & Packaging
Private label, custom carton printing, and branded packaging are available on standard MOQ. For e-commerce buyers, we can configure individual retail packaging with your branding.
Certifications and Compliance for Your Target Market
Our bedroom lighting range is certified for the major export markets we supply.
CE — European Market
European market compliance, covering LVD and EMC directives. Required for import into EU member states and most European markets.
UL — North American Market
UL-listed fixtures are the standard requirement for residential and hospitality projects in the US and Canada.
SAA — Australian Market
Australian market compliance. Required for import and sale in Australia and New Zealand.
ISO 9001:2015
Process quality management system, audited annually. Ensures consistent manufacturing standards across all production runs.
SGS — Third-Party Inspection
Third-party testing and inspection, available for buyer-requested audits on any production run.
Additional Certifications
For markets with specific compliance requirements beyond our standard portfolio, we can discuss the path to additional certifications at the product development stage.
Documentation Package
We maintain test reports, Declarations of Conformity, and material safety documentation per SKU — your import compliance team can request the full documentation package as part of the order process.
- Test reports per SKU
- Declarations of Conformity
- Material safety documentation
RoHS & REACH
Our standard LED drivers and components are sourced to RoHS-compliant specifications. If your market or retail channel requires formal RoHS documentation, we can provide it.
Tip: This comes up regularly for buyers supplying European retail chains — worth confirming at the spec stage rather than at customs.
Production and Lead Times
Standard Catalog SKUs
Standard catalog bedroom lighting SKUs ship in 25–35 days from order confirmation. That timeline covers:
- Production run on dedicated line allocation
- 100% aging test — every luminaire burns in before packing
- Photometric verification on production samples
- Export packaging to your market requirements
Custom & OEM Orders
Custom and OEM orders depend on tooling requirements:
Existing Tooling Covers Your Spec
Lead time is the same as standard: 25–35 days.
New Tooling Required
Add 15–20 days for the tooling cycle before production starts.
We communicate lead time milestones proactively — if a production issue is going to affect your ship date, you hear about it before the container is supposed to load.
Dedicated Capacity
Our 6 production lines and 600,000-luminaire annual capacity mean your bedroom lighting program runs on its own line allocation. A 2,000-unit bedroom lighting order doesn't compete for line time with other customers' programs.
6
Production Lines
600K
Annual Capacity
Minimum Order Quantities
MOQ varies by fixture type and customization level:
Contact us with your specific requirements and we'll confirm the applicable MOQ.
Bedroom Lighting FAQ
What is the minimum order quantity for bedroom lighting?
Standard catalog SKUs start at 50–100 units per model. Custom finishes (non-standard RAL colors, custom PVD) require 100–200 units per SKU. OEM projects with new tooling typically require 200–300 units per SKU.
If you're building a multi-SKU bedroom lighting program, we can discuss blended MOQ arrangements — contact us with your SKU list and target quantities.
What certifications do your bedroom lighting fixtures carry?
CE (Europe), UL (North America), and SAA (Australia/New Zealand) are held across our standard bedroom lighting range. ISO 9001:2015 governs our production process. SGS third-party inspection is available on request.
Test reports and Declarations of Conformity are maintained per SKU and provided as part of the order documentation package.
Can you match finishes across different fixture types in a bedroom set?
Yes — this is a standard request for hospitality and residential development buyers. We batch finish runs by color, so ceiling fixtures, pendants, and sconces ordered together in the same finish come from the same production batch.
Color variation between fixture types in a coordinated set is one of the most common quality complaints in this category; batching by color run is how we prevent it.
What's the difference between your standard bedroom lighting and master bedroom lighting range?
The distinction is primarily in fixture complexity and design tier. Standard bedroom lighting covers flush mounts, simple pendants, and basic sconces — volume SKUs optimized for price efficiency and installation simplicity.
Master bedroom lighting covers statement chandeliers, premium pendant configurations, and decorative sconces with more complex casting geometry and higher-end finish options.
Both run through the same QC process and carry the same certifications; the difference is in design complexity, material specification, and price point.
How do you handle cord length for bedside pendant pairs?
We set cord length to your specification at the factory — you tell us the drop you need (typically based on ceiling height minus desired hanging height), and we terminate at that length. We don't ship a standard length that requires field cutting.
For pendant pairs, we match cord lengths within ±5mm between the two units. This matters in installations where the pendants hang side-by-side — visible length variation is an immediate quality complaint.
What IP rating do bedroom lighting fixtures need?
Standard bedroom positions (ceiling, bedside) require IP20 minimum — adequate for dry indoor environments. Fixtures specified for bathroom-adjacent positions (en-suite doorways, dressing room areas with humidity exposure) should be IP44 minimum.
We manufacture both; specify your installation environment when ordering and we'll confirm the appropriate IP rating for each fixture position.
Related Lighting Applications
Bedroom lighting programs often extend into adjacent spaces. If your project or catalog covers more than the bedroom, these application categories share specification overlap and buyer synergy.
Living Room Lighting
Statement pendants, floor lamp adjacencies, and ceiling fixtures for open-plan living spaces.
Dining Room Lighting
Chandeliers and linear pendants for dining positions, often specified alongside bedroom programs in residential development projects.
Hotel Lighting
Full hospitality lighting programs covering all room types, public areas, and corridors.
Villa Lighting
Whole-property lighting programs for luxury residential, covering bedroom, living, dining, and exterior.
Fixture Categories for Bedroom Applications
For the full fixture range that feeds into bedroom lighting applications, explore our product categories:
Get a Quote for Your Bedroom Lighting Program
Send us your fixture requirements — types, finishes, quantities, target market, and any certification or customization needs — and we'll come back with a detailed quote.
If you're early in the sourcing process and don't have a full spec yet, tell us your target market, volume range, and price tier and we'll suggest a starting SKU mix based on what's moving for our existing buyers in that region.
Most new buyers in this category start with a sample order across 3–5 SKUs to test with their own customers before committing to a full program. We can ship samples within the standard lead time.
Wholesale only. Strict MOQ applies.
Contact Details
Phone / WhatsApp
+86 134 2021 9307Address
No. 14 Beisan Rd, Gusan Ind. Zone, Guzhen, Zhongshan, Guangdong, China
© 2026 ASCLighting. All rights reserved.