Custom Decorative Lighting Manufacturer & Supplier
Factory-direct custom and standard luminaires — pendants, chandeliers, wall sconces, ceiling fixtures, spotlights, and track lighting — manufactured in Guzhen, China's lighting capital, with full in-house production from die-casting to assembly.
We've been running production here since 2008, and we work wholesale only.
Decorative & Architectural Lighting Product Lines
We manufacture across the full decorative and architectural spectrum. Each line below ships from in-house production — not assembled from third-party components — which is why finish consistency and dimensional accuracy hold across batches, not just samples.
Pendant Lighting
Our highest-volume category and the one where finish consistency matters most to your downstream buyers. The line covers modern minimalist, glass, cluster, staircase, industrial, and wood variants — enough SKU breadth to anchor a product catalog without sourcing from multiple factories. For distributors building a pendant range, the ability to consolidate across styles under one supplier simplifies reorder logistics considerably.
Chandelier Lighting
Chandeliers carry the highest per-unit margin in decorative lighting and the most demanding quality expectations. Our chandelier line runs from modern linear and dining room formats to custom multi-arm configurations — including fully bespoke designs developed through our OEM program. The die-casting and CNC machining we do in-house is what makes complex chandelier geometry repeatable across a production batch; assembly-only factories can't hold the same dimensional tolerances on multi-arm frames.
Wall Lighting & Sconces
Wall sconces are a reliable add-on category for distributors already moving pendants or chandeliers — the same buyer who specifies a chandelier for a dining room typically needs coordinated wall lighting for the corridor. Our wall lighting line covers sconces, linear wall fixtures, picture and art lighting, hallway and stairway formats, and LED wall panels. Coordinated finish options across pendant and wall categories mean your buyers can spec a complete room without mixing suppliers.
Ceiling Lighting
The ceiling lighting line covers flush mount, recessed, decorative, luxury, modern, and industrial formats — a range that serves both residential and commercial project specs from a single supplier. Flush mount and recessed formats move in volume for residential developers and fit-out contractors; decorative and luxury ceiling fixtures carry the margin for specialty retail and hospitality supply.
Spotlights & Track Lighting
Track lighting and spotlights are the workhorses of commercial decorative projects — gallery, retail, and hospitality buyers reorder these regularly once a spec is established. Our spotlight line includes track, recessed, ceiling, adjustable, LED, wall washer, and gallery formats. Gallery spotlights in particular have grown significantly for us over the last two years — worth including if you're building a hospitality or retail-focused catalog.
Custom Decorative Lighting
This is where buyers bring a design concept, a reference image, or a project spec and we build the fixture. Custom pendants, custom wall sconces, custom architectural lighting, and hospitality-specific custom programs — all developed through our OEM/ODM process with 7–10 working day prototype turnaround. If your business model involves private-label or project-specific fixtures, this is the line that makes it viable.
OEM Engineering That Turns Your Design Concept Into a Shippable SKU
The OEM/ODM capability is the part of this factory that most buyers underestimate until they've used it. We run a 15-engineer R&D team — optical design, structural engineering, and driver/electronics integration — with a dedicated in-house optical lab. That's not a typical ratio for a 150-person factory, and it's the reason we can take a buyer's concept from approved drawings to physical sample in 7–10 working days.
Here's what that process actually looks like: you send us a reference image, target dimensions, destination market, and cost target. Our structural engineers develop the production-ready design, flagging cost traps early — overly complex casting geometry, non-standard driver cavities, finishes that require multiple process steps. We've done enough OEM development to know where decorative lighting designs get expensive, and we surface those issues before tooling is committed, not after.
The optical lab validates beam angle, lumen output, and thermal performance on the prototype before we cut production tooling. For project submissions that require IES files, we generate them from our own photometric measurements.
Private-Label Program for Mid-Size Distributors
For buyers building a private-label line, the commercial mechanism is straightforward: your design, your branding, our production infrastructure. You're not paying for a catalog fixture with your logo on the box — you're getting a fixture engineered to your spec, produced at scale, with the certification documentation your import team needs.
The 7–10 day prototype turnaround means you can iterate on a design without burning weeks on each revision cycle. Most of our OEM buyers run 2–3 prototype rounds before locking production; the speed of that loop is what makes the program commercially viable for mid-size distributors, not just large importers.
Multi-Market Certification Coverage That Clears Customs Without Delays
We hold CE, UL, SAA, and SGS certifications — covering Europe, North America, Australia, and general export markets. These weren't retrofitted after the fact; they were built into the product development process as we expanded into each market.
CE
European market compliance — Declaration of Conformity maintained per SKU
UL
North American safety listing — ready for US and Canadian distribution
SAA
Australian Standards Approval for Oceania market entry
SGS
Third-party inspection and testing for general export markets
Documentation Ready When Your Order Is Ready
By the time we pushed into North American and European distribution, the compliance infrastructure was already in place. For your import team, this means the documentation package is ready when your order is ready.
-
Test reports maintained per SKU and included in order documentation as standard
-
Declaration of Conformity available per product line
-
Material safety data sheets included with shipment documentation
-
Certification status review before order placement — a straightforward conversation, not a waiting game
Full In-House Production: Die-Casting Through Assembly
Most decorative lighting factories in Guzhen are assembly operations — they buy die-cast housings, buy drivers, buy shades, and put them together. We run die-casting, CNC machining, surface finishing, and assembly under one roof.
Why Vertical Integration Matters for Quality
That vertical integration controls the three variables that cause the most quality problems in this category:
Dimensional Consistency
Consistent metal component dimensions across production runs — no fit issues on-site
Finish Uniformity
Uniform surface finish across batches — no color or texture variation between orders
Driver Compatibility
Driver-to-fixture compatibility verified in-house before any unit ships
Production Process Controls
CNC Machining Tolerances
±0.1mm on critical mounting dimensions — your installation teams aren't dealing with fit issues on-site.
Powder Coating Line
Automated application at 60–80μm consistent thickness. Salt spray testing on finish samples before committing a batch to production — critical for buyers supplying coastal or humid-climate markets.
100% Aging Test Protocol
Every luminaire runs a full aging test before packing — LED driver failures and wiring faults show up here, not in your customer's installation.
We added the aging test protocol after a batch of LED drivers failed in the field for a Gulf distributor. That was an expensive lesson, and it's why the protocol is now non-negotiable.
The Numbers Behind the Capacity
Facility with 6 production lines — your program runs on its own line allocation, not queued behind other customers' orders
Luminaires annual capacity — enough to handle a 50,000-unit annual program without competing for line time
Employees — stable core technical team, consistent execution across repeat orders
ISO 9001:2015 + CE, UL, SAA, SGS — process framework and market-specific compliance in one supplier
Market Segments Where Our Product Lines Generate Repeat Business
Hospitality Supply — Hotels, Resorts, and Serviced Apartments
Hospitality is our highest-volume custom segment. Hotel and resort projects specify lighting by room type — lobby, guest room, corridor, restaurant — with consistent finish requirements across hundreds of units.
The commercial dynamic here is project-driven: a single hotel fit-out can run 2,000–5,000 fixtures, and the contractor or FF&E supplier who wins the spec controls a concentrated order.
Our custom program handles the full hospitality scope, from lobby chandeliers to guest room pendants, with finish matching across fixture types. Reorder cycles follow renovation and refurbishment schedules — typically 5–7 years — but contractors who establish a supplier relationship early get called back for each phase.
Restaurant and F&B Fit-Out
Restaurant lighting is a high-margin, high-reorder segment for distributors and fit-out contractors. New restaurant openings and rebrands drive consistent demand, and the design-forward nature of the category means buyers can command premium pricing on fixtures that aren't commodity catalog items.
Our pendant and chandelier lines cover the formats that move in this segment — linear chandeliers over dining tables, cluster pendants over bar areas, wall sconces for ambient zones.
Chains and franchise operators who standardize on a fixture spec reorder on expansion timelines, which creates predictable volume for distributors who hold the spec.
Luxury Residential Development and High-End Retail
Residential developers and luxury home builders specify decorative lighting at the project level — a single development can require consistent fixtures across 50–200 units. The margin profile in this segment is strong because buyers are specifying on design criteria, not commodity price.
Our chandelier and pendant lines, particularly the custom and luxury formats, serve this segment well. Lighting showrooms and specialty retailers who stock our collections benefit from the SKU breadth — enough range to serve different design directions without sourcing from multiple factories.
View luxury collectionsCommercial Interior and Office Fit-Out
Commercial interior projects — corporate offices, co-working spaces, retail fit-outs — specify architectural and decorative lighting in volume. Track lighting and spotlights are the primary formats here, with pendant and ceiling fixtures for feature areas.
The commercial fit-out segment operates on project timelines with defined delivery windows; our 25–35 day lead time on standard catalog items and proactive milestone communication are what make us workable for contractors managing tight installation schedules.
See spotlights and track lighting
Lighting Importers and Wholesale Distributors
Importers and distributors building a decorative lighting catalog need a factory that can supply consistently across multiple SKUs and multiple orders — not just deliver a strong first shipment. Our batch consistency, documentation standards, and 600,000-unit annual capacity are built for this buyer profile.
The full product range — pendants, chandeliers, wall sconces, ceiling fixtures, spotlights — means you can consolidate your decorative lighting sourcing under one supplier, reducing the coordination overhead of managing multiple factory relationships.
View all product linesProject Contractors and Interior Designers Sourcing Direct
Project contractors and interior designers who source factory-direct gain margin that would otherwise go to a distributor. Our wholesale-only model and strict MOQ mean this channel is for buyers placing real project volumes, not sample orders.
The OEM program is particularly relevant here — if your project requires fixtures that aren't in any catalog, we can develop them. Most project buyers in this channel start with a standard catalog order to establish the relationship, then move into custom development once they've seen how the production process works.
Start with a quote
Ready to Source Your Next Lighting Program?
Send us your fixture type, target market, volume, and any certification requirements. We'll come back with a detailed quote and, where relevant, a recommendation based on what's working for our existing buyers in your region.
Wholesale only. Strict MOQ applies. Located at No. 14 Beisan Rd, Gusan Ind. Zone, Guzhen, Zhongshan, Guangdong, China.